ISX12N (2018) for Truck Engine Manufacturers & Body Builders

Power

320 - 400 hp 238.62 - 298.28 kW

Torque

1150 - 1450 lb-ft 1559.19 - 1965.94 N•m

Certification

EPA 2018

Product Availability

North America, Africa Middle East, Latin America, Asia Pacific, Europe

Select an application

Truck Equipment Manufacturers and Body Builders

The 2018 ISX12N continues the evolution of emissions-leading natural gas engines from Cummins. Certified to the California Air Resources Board and Environmental Protection Agency's (EPA) Optional Low NOx emissions standard of 0.02 g/bhp-hr, it has 90% fewer NOx emissions than the current North American EPA standard. With 400 hp / 1,450 lb-ft torque, and near-zero emissions, the ISX12N is well suited for heavy-duty regional-haul truck, vocational, refuse applications, and motorcoach.

Reduced Emissions from Heavy Duty Trucks

  • Reduces smog forming NOx emissions by 90% vs. EPA NOx Standard
  • Can operate with 100% CNG, LNG, or renewable natural gas (RNG)
  • Significant GHG reductions with the use of RNG. 
  • Natural gas is the lowest carbon fuel available, with abundant domestic supply and stable pricing
  • Fueling infrastructure in place and growing
  • No infrastructure changes are required for current natural gas fleets

 

Features & Benefits

  • Heavy Duty Class 8 performance and efficiency
  • New electronic engine, ignition, and On-Board Diagnostics (OBD) emission control features. 
  • New engine control module – ECM model number CM2380.
  • Closed Crankcase Ventilation system for more complete combustion and lower emissions
Specifications

NOTE: For all engines and options available, horsepower may be limited by the truck OEM

REPTO - Available - Torque limit of 466 lb-ft continuous, 516 lb-ft intermittently, gear drive ratio is 1.32:1, rotation is same as the crankshaft

FEPTO - Available - Torque limit up to 625 lb-ft

NOx emission 0.02 g/bhp-hr. (90% below EPA)
Maximum Horsepower 400 HP (298 kW)
Peak Torque 1,450 LB FT (1,966 Nm)
Governed Speed 2100 RPM
Type 4-cycle, spark-ignited, in-line
6 cylinder, turbocharged, CAC
Engine Displacement 726.2 CU IN (11.9 Liters)
Number of Cylinders 6
Operating Cycles 4
Net Weight (dry) 2,650 LB (1,202 KG)
Fuel Type CNG/LNG/Biomethane
Aftertreatment Three-Way Catalyst
Base Warranty 2 Years, 250,0000 Miles (402,336 KM)


To access our complete brochure library, click here.
Maintenance

Overall, maintenance for the ISX12N  is similar to that of diesel engines, but there are a few key differences:

  • Motor oil specifically formulated for natural gas engines is required. Do not use diesel engine oil in a natural gas engine. If diesel engine oil is used, valve torching, piston scuffing and reduction in spark-plug life will occur.  
  • For more information, visit Cummins QuickServe Online.
Maintenance Item^ Hours
Oil And Filter* 1,000
Spark Plugs 1,000
Coolant Filter 1,500
Overhead Set Adjustment** 3,000
Cooling System Flush 6,000
Engine Brake Adjustment 6,000
Closed Crankcase Ventilation Filter 10,000
Ignition Coil Extension 10,000
Air cleaner / element Follow manufacturer's published recommendations

Consult your Owners or Operation and Maintenance manual for the complete daily and routine maintenance schedule.

^Based on a duty cycle of 50 mph / 80 kph average speed. Distance intervals may decrease based on average speed.
*Requires natural gas engine oil. These intervals apply to normal duty line haul truck and motor coach applications using CES 20085 or 20092 natural gas oil. For customers using CES 20092 natural gas engine oils only, the recommended interval is 40,000 mi (64,000 km) for vehicles with average road speeds greater than 25 mph (40 kph).
**Initial overhead set adjustment at 1,000 hours.

Redirecting to
cummins.com

The information you are looking for is on
cummins.com

We are launching that site for you now.

Thank you.