Energy IQ: From decarbonization to on-site generation, three energy trends for data centers

""

In 2017, a group of researchers estimated global data centers could use 25% of the world’s electricity by 2025 1. This is more electricity than any country in the world, including the U.S. You would be happy to hear this prediction is not materializing so far and you might be wondering, ‘how much energy and electricity data centers consume?’

The world’s data centers consume around 200 Terawatt-hours (TWh) of energy annually, almost all of it is electricity 2; this is about 1% of the world’s electricity consumption. While this is much lower than the prediction above, it still makes data centers a considerable consumer of energy. However, the data center industry has made significant progress to improve their energy efficiency. This has resulted in data center energy consumption to plateau in recent years. What is even more exciting is the industry’s ability to achieve plateauing energy consumption while successfully meeting its customers increased need for services. 

Global Data Center Energy Usage Plateaus
Global data centers energy usage plateaus

Now that the basics around data centers’ energy usage are covered, let’s move into the three data center energy trends you would likely hear more frequently in the years ahead.

No. 1: Increasing environmental consciousness is driving a focus on decarbonization

From airlines to data centers, lowering carbon emissions and decarbonization are increasingly getting traction across most industries. In the process of using 200 TWh of electricity, data centers create a significant carbon footprint. This is because they commonly rely on the world’s current power generation mix, which is still heavily fossil fuel based.

Two of the most popular decarbonization paths within the data center industry are the direct use of renewable energy sources and the use of renewable energy credits (RECs).

  • Direct use of renewable energy sources: This is where a data center is fully or partially powered by renewable energy e.g. geo-thermal, hydro, solar, and wind. While this is the more environmentally beneficial approach, it is also more challenging due to the intermittent nature of renewables. Data center operators rely either on existing electricity markets or in some cases, energy storage options to manage this challenge.

Direct use of renewable energy sources

  • Use of renewable energy credits (RECs): In this scenario, the data center operators purchase renewable energy and associated RECs. In cases where the renewable energy is produced in a location far away from the data center, the operator sells the renewable energy back to the grid and uses RECs to offset its carbon footprint. This is a common approach across the data center industry, and partially what makes Google the largest corporate buyer of renewable energy in the world 3. Here is how this approach is beneficial: it gives the renewable energy provider the customer commitment to invest in new projects, even if the renewable energy is not necessarily used by the data center. In other words, this approach delivers an increasing amount of renewable energy to the grid for all of us to use. Meanwhile, critics highlight that this approach doesn’t necessarily reduce the data center’s carbon contribution.

These two approaches are expected to co-exist in the data center industry’s path towards decarbonization.

No. 2: An increase in on-site energy generation

Data centers commonly rely on the grid as the primary source of electricity. While relying on the grid is convenient, the continued expansion of data centers could put extra stress on existing grid infrastructure causing grid instability. In some regions, data center growth and energy demands could outpace grid infrastructure capability and investment. To address these challenges, some data center operators may deploy on-site power generation.

Photovoltaic (PV) arrays, natural gas generator sets, and fuel cells are common sources of on-site generated power. These sources are also known as distributed energy resources (DER) and may operate connected to the utility or isolated from the utility (known as island operation) as a microgrid. Stationary energy storage may also be incorporated into a microgrid enhancing the ability to operate isolated from the utility.

On-site power generation allows a data center operator to use power from cleaner sources when available, while supplementing energy from other sources when the cleanest source is not sufficient. This feature of on-site generation supports advancement towards sustainability goals while maintaining reliable power service to the data center.

No. 3: Rising focus to achieve higher levels of energy efficiency

Data centers offer vast opportunities for energy efficiency, and the industry has taken full advantage in recent years. Let’s cover two aspects of energy efficiency in a data center.

  • IT infrastructure: Historically, data centers improved energy efficiency of IT infrastructure through higher utilization of individual IT equipment and server virtualization. Going forward, converged infrastructure (CI) and hyper-converged infrastructure (HCI) are expected to lead energy efficiency gains in data centers. Simply put, CI features building blocks made up of storage and compute functionalities physically combined in a turnkey product. Meanwhile, HCI relies on a software to combine compute, storage and networking functionalities. Both technologies, in different ways, deliver a more scalable architecture helping with energy efficiency. Within a data center, to deliver the same computing output, you can afford to have fewer servers, storage and network equipment if you are using one of these technologies.
  • Non-IT infrastructure: Power usage effectiveness (PUE), the ratio of total energy used by the data center to the energy used by computing equipment, is a common indicator of a data center’s energy efficiency. The industry average PUE has improved from 2.5 in 2007 to 1.67 in 2019 4, a clear indicator of shrinking contribution of non-IT infrastructure, heating, cooling, lighting and others, in a data center’s energy consumption. Going forward, advancements in cooling systems will take center stage in energy efficiency gains within non-IT infrastructure. Natural cooling, where cool ambient air or chilled water from nearby resources are used to cool the facility, will impact the geographical locations of data centers. Additionally, an increased prominence of liquid cooling technologies will impact data center cooling system designs. Meanwhile, on the IT infrastructure, the expanding need for IT equipment to operate at higher ambient temperatures will reduce the need for cooling per computing capacity.

It is expected facility and energy professionals leading comprehensive energy efficiency plans covering IT and non-IT infrastructure will stay ahead of their peers in energy efficiency gains.

Sign up below for Energy IQ to receive energy focused insights periodically. To learn more about the data center power solutions Cummins Inc. offers, visit our webpage.

Think your friends and colleagues would like this content? Share on LinkedIn and Facebook.

References:

1 Lima, J. M. (December 12, 2017). Data Centres Of The World Will Consume 1/5 Of Earth’s Power By 2025. Data – Economy. Retrieved from https://data-economy.com/

2 Global data centre energy demand by data centre type. (January 7, 2020). International Energy Agency. Retrieved from https://www.iea.org/

3 Pichai, S. (September 19, 2019). Our biggest renewable energy purchase ever. Google. Retrieved from https://www.blog.google/

4 Lawrence, A. (May 2019). Is PUE actually going UP?. Uptime Institute. Retrieved from https://journal.uptimeinstitute.com/

Aytek Yuksel - Cummins Inc

Aytek Yuksel

Aytek Yuksel is the Content Marketing Leader for Cummins Inc., with a focus on Power Systems markets. Aytek joined the Company in 2008. Since then, he has worked in several marketing roles and now brings you the learnings from our key markets ranging from industrial to residential markets. Aytek lives in Minneapolis, Minnesota with his wife and two kids.

Cummins Custompaks are being used for water management as Thailand struggles with its water crisis

CustomPak on site

Water crisis

Sixty Cummins Inc. CustomPaks are in service in Thailand as part of a critical water management plan aimed at easing the country’s water crisis – a crisis that has caused enormous economic and social damage and stirred conflict among communities.

Over the past several decades, Thailand has continually faced water problems caused by severe drought. Water reserves in dams and reservoirs are insufficient while water resources are often contaminated with toxins caused by urban communities and the industrial and agricultural sectors.

Severe flooding is a threat, too, at a time when the realities of climate change are hanging over the country.

As a result, the allocation of precious water resources, which must be shared among various stakeholders including new and existing industry, large and small agriculture, and cities and villages has become a flashpoint.

Kittithanapat Engineering Co. (KTP), has been involved in the water management system since 1996, working closely with authorities such as the Royal Irrigation Department, Department of Water Resources, Bangkok Metropolitan Authority and others.

CustomPaks on site

600 hp CustomPaks

To help KTP meet its often urgent requirements, Cummins DKSH (Thailand) has recently supplied 60 Australian-built CustomPaks – 45 powered by Cummins’ X15 engine rated at 600 hp, and 15 powered by the QSL9 rated at 325 hp. These fully self-contained powerpacks are emissions certified to Tier 3.

The CustomPaks are coupled to hydraulically-driven, large-volume submersible water pumps sourced by KTP from US company Moving Water Industries (MWI); KTP is the exclusive distributor in Thailand for these MWI Hydroflo pumps.

Prior to Cummins’ involvement, KTP was using another diesel engine brand but service support wasn’t up to the standard required.

Long-serving KTP engineer Kittisak Thanasoot says Cummins DKSH’s reputation for technical and aftersales support along with the reliability of the Cummins product were a key reason behind KTP’s decision to specify the CustomPaks for the Royal Irrigation Department.

The ability of Cummins DKSH to respond to short delivery times was also important.

“Supplying large quantities of high horsepower diesel engines for emergency situations such as flash flooding can be a challenge for KTP,” says Kittisak Thanasoot.

“Responding to the needs of the government agencies to manage such problems in a timely manner and with least impact on communities, KTP has found the answer in our partnership with Cummins DKSH.”

Power, pride and passion

Parked semi truck

The switch back to Cummins power has been beneficial for iconic New Zealand company Uhlenberg Haulage. It's all about whole-of-life costs.

Uhlenberg Haulage is closing in on 60 years in business, having been founded in 1966 by Mike and Carol Uhlenberg.

Based in Eltham, Taranaki, in New Zealand’s North Island, the operation is today owned and operated by their sons Chris, Daryl and Tony Uhlenberg.

Describing the Uhlenbergs as “old school family truckies”, Daryl talks about the company’s time-honored journey with a definite tone of pride, especially the work of his parents in laying the foundations for what is today an iconic fleet in its own right.

Cummins Inc. made its debut in the Uhlenberg fleet in 1971 with an NH250 powering a second-hand Kenworth K923 used in logging. A second Kenworth, a new W924 with a Cummins NTC335, followed soon after hauling an LPG tanker.

The Uhlenberg operation today comprises 40 prime movers and a variety of trailing gear to cater for the myriad of a jobs the fleet is involved in.

A number of Peterbilts feature in the fleet although Kenworth is now the brand of choice with six new units to be delivered over the next 12 months to cater for business growth.

Cummins’ X15 Euro 5 engine rated at 550 or 600 hp is the preferred power specification, with 18 red engines currently in the fleet.

Uhlenberg family in front of truck

Whole-of-life support

“The switch to Cummins has been a very good experience for us. We have nothing but praise for the Cummins organization,” says Daryl.

“The whole-of-life picture is the key thing for us and we’ve got that nailed with the support we get from Cummins – parts availability, scheduled maintenance, life expectancy and in-frame rebuilds.

“So the red engines turn up, we run them to life, which is 900,000 to 1.2 million kilometers, and then Cummins does an in-frame overhaul in a timely manner. If there’s an issue, parts and support are close by.

“The support we get from Cummins Palmerston North is fantastic, second to none.”

Daryl recently looked under a Kenworth that was in the workshop for a service and was surprised to see no oil leaking from the one-million-kilometer X15. “I remember when I was a fitter we had to wear a raincoat when working under a truck,” he jokes.

Fuel agnostic

Acknowledging that the push to decarbonize is now “very real”, Daryl likes the idea of Cummins’ fuel agnostic concept where one base internal combustion engine, optimized to run on diesel, can also be customized to run on ultra-low and zero-carbon fuels like renewable natural gas and hydrogen.

“My father was a pioneer of linehaul trucking in New Zealand and he always embraced new technology. He was never scared of it,” he says.

“I tend to be a little more cautious but I can see where a 500 hp natural gas or hydrogen engine would work for us in short haul applications,” he admits. “We’re certainly willing to look closely at these alternative fuel technologies when suitable infrastructure is in place.”

Redirecting to
cummins.com

The information you are looking for is on
cummins.com

We are launching that site for you now.

Thank you.