What are the low-carbon fuels?

""

Many businesses have made it a priority to reduce their carbon footprint. Multiple ways to reduce carbon dioxide (CO2) emissions are available to business owners. 

One is to purchase carbon offsets—pay someone else to reduce emissions on your behalf. Another is to use less energy, for example, have employees travel less often, or by improving the energy efficiency of a building. Using low-carbon and alternative fuels is a third option which has become viable for an increasing number of businesses. Low-carbon fuels can be used as a substitute for traditional fossil fuels in many applications. For example, vehicles of all types, including personal cars, trucks, off-road vehicles, ships, and more can run on low-carbon fuels. Purchasing electricity made from low-carbon fuels or renewable energies is also a way to reduce a business’ carbon footprint. 

Are natural gas and propane low-carbon fuels?

That’s right—despite their fossil origin, natural gas and propane are low-carbon fuels—in comparison to traditional alternatives. Both have a lower emission factor than gasoline and diesel. This means that burning a certain amount or natural gas or propane will release less CO2 than burning the equivalent amount of gasoline or diesel. Fuels with higher carbon contents release more CO2 when they are burned. Natural gas consists primarily of methane. One molecule of methane contains a single atom of carbon. As a result, methane has a lower carbon-to-energy content than other fossil fuels. 

Engines used as mechanical drives in oilfield operations are prime candidates for natural gas operation. Oil wells almost always produce natural gas in addition to oil. When an extraction site doesn’t have infrastructure to collect and transport the available natural gas, the unwanted natural gas is flared. Instead, using this excess natural gas an alternative to diesel for the mechanical drives saves money, reduces emissions, and helps secure the fuel supply. 

Conversions of coal-fired power-plants to natural gas are also a major trend in the power generation sector. You may have read about a local coal power-plant closing? Chances are, it’s being replaced with a natural gas-fired combined cycle power plant. 

What are CNG, LNG, LPG; are they low-carbon fuels?

Tractor-trailers, hauler trucks, dumpster trucks, buses and other commercial vehicles, and even ships can be converted to run on either compressed natural gas (CNG), liquefied natural gas (LNG), or liquefied petroleum gas (LPG, a form of propane). 

This allows the owner to lower the emissions of the converted vehicles without breaking the bank. With the right use case, fuel conversions also provide several other benefits. You can read more about these benefits of alternative fuels and fuel-flexibility.

What are biogas and renewable natural gas?

Gaseous hydrocarbons can also be readily produced from biomass. Like renewable diesel and biodiesel, these fuels are CO2-neutral. Significant amounts are created through natural fermentation in bogs and in the digestive tract of mammals, particularly cows. Bacteria eat organic matter, breaking it down and releasing methane, CO2 and hydrogen sulfide. The resulting gas is known as biogas. 

Biogas is also an unintentional product of fermentation occurring in landfills. In the United States, landfills are required to collect biogas to prevent its emission into the atmosphere. The requirement exists because methane, when it is not burned, is a much stronger greenhouse gas than CO2. While some landfills flare off the collected biogas, others use it productively. Biogas can be used as-is in specially designed internal combustion engines to generate electricity. More simply, it can be burned in a furnace or a boiler for heat. 

How is biogas produced?

In certain use-cases, biogas can also have negative carbon intensity value. This is because the capture and productive use of biogas prevents carbon emissions.

It is also possible to separate the methane from the other, unwanted constituents. Renewable natural gas is then obtained. Renewable natural gas is fully interchangeable with natural gas and can be injected into natural gas pipelines or used on its own.  

Biogas and natural gas are also produced industrially at wastewater treatment plants and livestock operations. Most commonly, biomass—sewage sludge or cow manure—is fermented in large tanks known as digesters, generating biogas. To promote fermentation, the digesters can be heated using waste heat from biogas-fueled on-site generators—a classical use case for combined heat and power. According to the U.S. Department of Energy, about 1,300 wastewater treatment plants in the United States produce biogas by fermentation and use it on-site. 

Running gas generators on biogas or renewable natural gas is a great way to produce CO2 free electricity from renewable resources. Contrary to renewable electricity produced by solar panels and wind turbines, which is inherently variable, renewable electricity produced in a generator using biogas and renewable natural gas is available on-demand. This makes biogas and renewable gas great decarbonization options for facilities which require an always-available source of power on-site for backup, prime or continuous power purposes. This is why many data centers, hospitals, industrial facilities and more are exploring or investing in biogas and renewable gas generators.

What is hydrotreated vegetable oil; is it renewable diesel?

Diesel-like fuels can be manufactured without the use of any fossil resources. Hydrotreated Vegetable Oil (HVO) is one common type. HVO is obtained by processing lipids such as vegetable oil, tallow or used cooking oil, which is made of paraffinic hydrocarbon. The fuel is derived from the same feedstocks used to produce biodiesel. However, instead of using the transesterification process, HVO is produced via the hydrotreated process. HVO is sometimes referred to as renewable diesel, or green diesel. 

What is biodiesel; is biodiesel a low-carbon fuel?

Biodiesel is a distinct fuel. It is made using a chemical process known as transesterification. The transesterification process results in molecules called fatty acid methyl esters, or FAME. Biodiesel consist primarily of these FAME molecules. Fuels meeting the industry standard for renewable diesel can be used as drop-in replacements for fossil diesel. Biodiesels, in contrast, must be blended with fossil diesel to be used in most vehicles. 

When renewable diesel and biodiesel burn, they merely return carbon to the atmosphere—the same carbon atoms that the plants used as feedstock withdrew from the atmosphere. They are, accordingly, net-CO2 free fuels, or CO2-neutral

What are power-to-x and e-fuels?

This is a rapidly emerging category of synthetic low-carbon or no-carbon fuels. E-fuels are manufactured from inorganic feedstock, primarily CO2 and water, using renewable electricity, such as solar, wind, or hydropower. The category includes a variety of hydrocarbon fuels such as e-methanol, e-diesel and e-methane, as well as non-hydrocarbon fuels such as ammonia. Don’t forget to check out what are power-to-x and e-fuels with more details and examples.

What about hydrogen?

Hydrogen burns without releasing any carbon. Not all hydrogen, however, is low-carbon. Most hydrogen produced in the world today is manufactured via the steam methane reforming process. This process uses methane as a feedstock and generates a lot of CO2 (unless the methane feedstock is coming from biogas, in which case the process is CO2-neutral). 

Another process, electrolysis, allows to produce hydrogen from water. Electrolysis is energy-intensive, but when it is conducted using renewable electricity, the result is fully CO2-free hydrogen, or “green hydrogen.” 

A variety of applications that use green hydrogen are commercially available or in development stages, including locomotives, personal vehicles, gas turbines, internal combustion generators, and more. Green hydrogen can also be used as a feedstock for other e-fuels. 

Finding the right alternative fuel for your business

You went through a range of alternative and low-carbon fuels. As you seek to fulfill the needs of your business, it is important to remember there is not a one-size fits all answer. 

Beyond the fuel itself, here are a few others you can take into consideration in finding the right fit for your business: Availability of these fuels across your locations, the local regulations your equipment needs to comply with, and your specific use case.

As you have noticed, these additional considerations are more local and unique to your business. You can access more information and discuss these further by reaching out to a partner local to your business.  

Aytek Yuksel - Cummins Inc

Aytek Yuksel

Aytek Yuksel is the Content Marketing Leader for Cummins Inc., with a focus on Power Systems markets. Aytek joined the Company in 2008. Since then, he has worked in several marketing roles and now brings you the learnings from our key markets ranging from industrial to residential markets. Aytek lives in Minneapolis, Minnesota with his wife and two kids.

Unpacking CARB’s trucking rules, regulations and legal challenges

Semi truck driving

The state of California has positioned itself as a central figure in a revolutionary shift from a 100-year path of internal combustion engines (ICE) used in commercial transportation. Within a three-year span, the state has adopted the world’s most stringent commercial vehicle regulations: Advanced Clean Trucks (ACT), the Heavy-Duty Engine and Vehicle Omnibus Regulation and Advanced Clean Fleets (ACF). The three rules work together to gradually transition commercial trucks, buses and vans to zero emission vehicles (ZEVs).

The stringent regulations have generated plenty of praise, collaboration, concern and even legal challenges. Turning away from familiar and trusted technology will be anything but easy but the industry is proving it is possible.

Questions around ZEV cost and capability relative to ICE are not taken lightly by Cummins nor other players in one of the nation’s most critical industries.

As with prior emissions legislation, amendments will undoubtedly emerge as collaborative efforts between policymakers and industry continue. That is currently the case with the Omnibus regulation as proposed amendments are under review by the Environmental Protection Agency. Some of the amendments in question focus on diesel engine testing, warranty periods and aftertreatment. 

“Omnibus, the amended version, got resubmitted to EPA and is calling for increased legacy allowances,” explained Tom Swenson, Director of Global Regulatory Affairs.

Emission legislation passed by the California Air Resources Board (CARB) requires a Clean Air Act waiver from the EPA when it proves stricter than federal policy. CARB has been receiving federal waivers for its emissions policies since the 1960s given its ongoing battles with air pollution.

Geographical features such as valleys and mountains appearing throughout the state can hinder air circulation to keep pollutants hanging around.

“The San Joaquin Valley in California, for example, is like a little trap of NOx,” Uma Vajapeyazula, North American Market Strategy Director, described.

Eager to overcome its unique air pollution issues, CARB has kept a close eye on ZEV development. Once board members decided the technology was up to the challenge of replacing ICE trucks up to Class 8, CARB adopted the Advanced Clean Trucks (ACT) rule in June of 2020. To date, it’s the only one of the three ZEV polices that has received an EPA waiver.

 The ACT rule requires that manufacturers who certify chassis or complete vehicles with a gross vehicle weight rating (GVWR) greater than 8,500 lbs. sell zero-emission vehicles (ZEV) at an increasing percentage of their annual California sales starting with the 2024 model year. The annual reporting began with the 2021 model year.

 OEMs struggling to sell ZEVs can buy ZEV credits from other manufacturers to unlock sales of their ICE vehicles. However, there’s concern that funds used to purchase ZEV credits could impact their bottom line.

 “One question is, ‘Will ZEV credit trades happen between competitors?’” Swenson said.

In September 2021, CARB adopted the Heavy-Duty Engine and Vehicle Omnibus Regulation to “drastically cut smog-forming nitrogen oxides (NOx) from conventional heavy-duty engines. The Omnibus Regulation will significantly increase the stringency of NOx emissions standards and will also lengthen the useful life and emissions warranty of heavy-duty diesel engines for use in vehicles with a gross vehicle weight rating (GVWR) greater than 10,000 pounds. The more stringent NOx emission standards begin with the 2024 model year engines and become more stringent with 2027 and subsequent model year engines.”

 Extending warranty coverage will necessarily increase the cost of equipment, Swenson noted.

 Advanced Clean Fleet legislation rolled out next in April 2023. ACF requires fleets to gradually replace acquired ZEVs while allowing them to retain ICE vehicles throughout their useful life. Per CARB, useful life is defined “as the later of either: 1) 13 years, beginning with the model year that the engine in the vehicle and was first certified for use by CARB or United States Environmental Protection Agency (U.S. EPA), or 2) the date that the vehicle exceeds 800,000 vehicle miles traveled or 18 years from the model year that the engine in the vehicle was first certified for use by CARB or U.S. EPA (whichever is earlier).”

ACF compliance challenges

In August, EPA held an ACF waiver hearing that included a full day of testimony, comments were also accepted online. One of the companies to participate was Sundance Stage Lines in San Diego. The charter bus company currently uses diesel-powered custom-built buses with a 1,000-mile range and 20-minute refueling time. It has stated opposition to ACF’s zero-emission mandate.

“As BEVs, range is cut to approximately 200 miles (substantially less in cold weather), at which point the vehicle requires a four-hour charge at a dedicated high-voltage charger before it can proceed another 200 miles,” Sundance Stage Lines writes. “Thus, any group attempting to access an area not serviced by either an airport or a nearby charter operator will be forced to make other arrangements. This will have substantial negative effects both on motorcoach operators and the traveling public.”

Among the concerns expressed, Sundance noted that “four major motorcoach manufacturers offer at least one of their models as battery-electric vehicles (BEVs.) In converting the vehicle to run as a BEV, all of the buses have lost over 70% of luggage space because the volume of batteries needed to give the vehicle a reasonable range requires the batteries and the accessories normally driven by the engine be mounted in the underfloor luggage compartments.”

Sundance also pointed out the high cost of ZEVs versus ICE. In the case of motor coaches, the company contends the price “more than doubles, from $650,000 each to over $1,400,000 per bus - a cost per unit over twice as high as any other electric vehicle.”

In its ACF waiver request submitted last November to EPA, CARB writes that “anticipated developments will likely both reduce the costs and increase the number of commercially available ZEVs, including projected decreased costs of batteries and improvements in battery energy density due to economies of scale and increasing pace of technology development and decreased costs of other ZEV components resulting from the projected increased production of ZEVs.” 

Legal battles persist

At least three lawsuits that have emerged to challenge the enforcement of ACF make it California’s most contentious trucking legislation to date. 

The first complaint was filed in October 2023 by the California Trucking Association in the U.S. District Court for the Eastern District of California. The challenge has resulted in the state holding off full enforcement that was originally slated to go into effect on January 1, 2024. CTA’s 32-page complaint argues that the state needs a waiver from the Environmental Protection Agency prior to enforcing ACF since its policies exceed federal mandates.

In response, California put ACF enforcement on hold for most fleets pending receipt of an EPA waiver. CTA noted on its website that waivers typically take 9-12 months to process. The state has been enforcing ACF for public fleets since applying for the waiver in November

“They’re implementing and enforcing ACF for state [California] and local government fleets,” explained Mari Mantle, Cummins Regulatory Affairs Manager. “It's the high priority, federal and then drayage [fleets] that they're waiting on the waiver for.”

CTA’s complaint also highlights concerns of ZEVs relative to internal combustion. Acquisition costs of ZEVs, according to CTA, are “projected to be 2 to 6 times higher than comparable ICE tractors”; ZEV range “is less than half that of an ICE truck”; additional refueling stops needed for ZEVs will require additional time and infrastructure and thus limit more route options historically utilized by ICE trucks.

In April, American Free Enterprise Chamber of Commerce (AmFree Chamber) and Associated Equipment Distributors (AED) filed suit also challenging California’s ACF regulation.

In May, the Nebraska Trucking Association topped a list of plaintiffs that included seventeen states opposing ACF: Alabama, Arizona, Arkansas, Georgia, Idaho, Indiana, Iowa, Kansas, Louisiana, Missouri, Montana, Nebraska, Oklahoma, South Carolina, Utah, West Virginia and Wyoming. Several of these same states joined a suit last year against the Advanced Clean Trucks rule.

Tom Quimby headshot

Tom Quimby

Tom Quimby, On-highway Journalist, has a broad range of experience covering various topics for local and national periodicals. His stories and photos have appeared in The Washington Times and more recently in Commercial Carrier Journal, Overdrive, Hard Working Trucks, Equipment World and Total Landscape Care. Tom has reported on Class 1 – 8 commercial vehicles since 2015. A graduate of the University of Southern California, Tom enjoyed growing up around hot rods, dirt bikes, deserts and beaches near San Diego. He now calls Northwest Florida home.

STEM Project Unites Children in the UK and Uzbekistan

Zoom call with West Park School and the Children's Home

If you ever doubted the ability of young minds to grasp what many adults would consider complex concepts, then you'll be amazed by the achievements of two groups of young children - one in a school in northern England, and the other 4,000 miles away in an orphanage in Uzbekistan.

With the support of Cummins, children ranging from six to twelve years of age have managed to bridge the language, culture, and time divide. They are collaborating with great success on building a basic electric racing car.

The story begins with a visit by Cummins to Rudmash Export Service, which has been representing Cummins in Tashkent, the capital of Uzbekistan, since 2018.

Rudmash has an impressive list of clients in mining, construction, gas, and power generation.

It is also a highly respected supporter of community initiatives, a key focus for Cummins.

During the visit, Amit Kumar, Cummins' Technical Territory Manager for the Commonwealth of Independent States (CIS) region, mentioned the work he was doing with local schools involving the Greenpower Education Trust in the UK.

Amit suggested that Rudmash might consider introducing local children to the fantastic learning opportunity that comes from building an electric car.

The Rudmash executive team loved the idea and reached out to their friends at the local orphanage (Children’s Home 22), about the proposed connection with children from West Park Academy – a primary school near Cummins' manufacturing plant in Darlington, England.

Students at the Children's Home working on the car
The children from Children's Home 22 building the car

Speaking through a translator, Rudmash Sales Manager Mr. Mavlonberdi Akhmedov said there was no hesitation from the orphanage. "Everyone was excited about it," he said. "When we showed them pictures of the car, the children's eyes lit up with interest.

"The only issue we encountered was not being able to involve the older children, but I think Amit has something in his mind for them. It will involve a similar collaboration with a UK school on a larger electric car that they can fit in!"

Over in Darlington, teacher Mr. David Fraser and his group of 9 to 11-year-olds were thrilled at the prospect of working with children from another country.

Students from West Park Academy
The children from West Park Academy

"Before our first session, I showed the children a map of Uzbekistan and explained how the time zones worked," Mr. Fraser said. "Tashkent is four hours ahead of us."

"When they started hearing a different language, they were a little hesitant although still excited. However, towards the end, once they got used to the translation pauses, lots of questions were being asked."

"They adapted very quickly, and every session with the orphanage has become more engaging. The children have greatly benefited from the relationship. It's been a great learning experience."

The car involved in the project is called the Greenpower Goblin G2. It comes as a flat-pack kit including chassis, wheels, steering, disc brakes, a 24V electric motor, and two 12V batteries.

Students at West Park Academy working on the car
The children from West Park Academy building the car

"The project is all about inspiring young children to take an interest in engineering in a fun and innovative way," said Amit Kumar, who earlier this year received special recognition at the North-East England STEM (Science, Technology, Engineering, and Mathematics) Awards for his years of dedication to STEM Education.

"The build introduces children to basic mechanics and electronics and might be the first step on the pathway to a career in engineering or another STEM field.

Mr. Fraser said the children soon started discussing aspects of the car such as frames, brakes, and steering geometry. There was a lively question-and-answer session on different materials that could be used to design and make the car's body. Their last session was about controls and driving.

"There are also other general discussions, as the children are eager to learn more about each other's countries," said Amit, who leads the sessions.

Students at the Children's Home looking at the car drawing
The children from Children's Home 22 talking about a drawing while on a zoom call

Rudmash service engineer Mr. Abdullayev Shakhzod said the children were enjoying the experience of working in teams.

"It's a fantastic new chapter in the history of a place that has a storied past. It was established in 1942 during the Second World War to care for evacuees from all over Eastern Europe. Children of over 40 different nationalities have been cared for by this children's home.

"The home is named Antonina Pavlovna Khlebushkina after the woman who ran it in the early days. She would be so proud of what is happening there today.

"As the summer vacation times differ in the two countries, the West Park school children have already finished building their cars, while the Uzbekistan car is about 40% complete.

"When the children return from their summer camp in September, they will start the rear axle, motor, and electrical components. Then they can take it for a drive," Amit said.

"Just before their summer term ended, the West Park children conducted a demonstration for their new friends in Tashkent. They set up a track and showcased driving the car on it. It was a great success."

Mr. Akhmedov, speaking through a translator, mentioned that the management team at Rudmash was considering how the project could expand beyond the children's home and into schools and youth organizations throughout Uzbekistan.

Mr. Akhmedov praised Cummins for their support of the project. "They have shown great responsibility at every stage and been very proactive, always striving to ensure things are done right.

"This is just the beginning for these children. It's already motivating them to learn more and develop their skills in broader technical applications.

"I would say that this project is not only important for the children's home but also for our city of Tashkent and the Republic of Uzbekistan, as it is nurturing an educational culture that is highly valuable. I can't thank Amit and Cummins enough."

Amit expressed that it's a privilege to help Cummins inspire young people about engineering and science from an early age.

Redirecting to
cummins.com

The information you are looking for is on
cummins.com

We are launching that site for you now.

Thank you.